Help me please

[Leetpro]

also try resetting the bios

 

[marcus.strydom.daedalus]

Oh, and maybe to ask the obvious but just in case. Is it beeping at all?
edit: oh, and are you running on board graphics or do you have a graphics card installed?

On board

Sent from my SM-J400F using Tapatalk

 

[marcus.strydom.daedalus]

also try resetting the bios

Done already

Sent from my SM-J400F using Tapatalk

 

[Chad29]

Take out everything except the CPU. Check if you have an onboard speaker then power on. If you get 3 beeps the board is probably not dead.

 

[marcus.strydom.daedalus]

First step, remove all RAM modules, then try only a single stick in each slot. If nothing then try a different stick. If you have the patience, try each stick in each slot.

This seems to have worked

Sent from my SM-J400F using Tapatalk

 

[marcus.strydom.daedalus]

Evrything is running the way it used to now. Dont know whatvwas wrong just happy its fixed

Sent from my SM-J400F using Tapatalk

 

[Montezuma]

Evrything is running the way it used to now. Dont know whatvwas wrong just happy its fixed

Sent from my SM-J400F using Tapatalk

Good news! Is the ram back in the same slot it was before, perhaps it was seated properly, though you *should* have gotten ram error or some motherboard warning code if it was the ram. But I'm not familiar with that motherboard.

 

[marcus.strydom.daedalus]

Good news! Is the ram back in the same slot it was before, perhaps it was seated properly, though you *should* have gotten ram error or some motherboard warning code if it was the ram. But I'm not familiar with that motherboard.

Dont have a speaker connected and couldnt find one otherwise i would have just googled the error code

Sent from my SM-J400F using Tapatalk