simmonsz
Senior Member
- Joined
- Nov 27, 2016
- Messages
- 61
- Reaction score
- 10
- Points
- 2,685
Hi Guys
First build log here! [MENTION=191]Hellfire[/MENTION] and I have been working on a wall mounted steampunk themed computer, with custom water cooling. We’re already quite far in (few tweaks and polishing to do), but another friend ([MENTION=30039]OPiA7E[/MENTION]) recommended posting our progress on the forum. The system has been made for high-end VR gaming, running the HTC Vive.
Computer Specs:
Water Cooling Specs:
Additional Items:
There are a few additions we want to add on, mostly cosmetic (some serving a small purpose), for example an amp meter, sitting just under the voltage meter. Might look to add an industrial light too, if we have the space. Other than that we plan on adding a Raspberry Pi3 (Just to the right of the capture card), hooked up to the fans covering the radiator for control over the mode/colour/speeds.
There’s been a few learnings from this, as it’s been our first time building a wall mounted computer. As you’ll see in one of the videos below, we decided to call the PC ‘After Thought’, as there was some rework that was done, and luckily for us some of the cabling just about fit. All in all good experience for the next one (some time in the future).
Filling Up: https://www.youtube.com/watch?v=mSO9RV1NlMA
Power On: https://www.youtube.com/watch?v=U-DYs5yJw0s
Hope you guys enjoy, and once the absolute final version is done I’ll be sure to upload that too!
p.s. log of photos in follow up posts. Latest image attached to this post
First build log here! [MENTION=191]Hellfire[/MENTION] and I have been working on a wall mounted steampunk themed computer, with custom water cooling. We’re already quite far in (few tweaks and polishing to do), but another friend ([MENTION=30039]OPiA7E[/MENTION]) recommended posting our progress on the forum. The system has been made for high-end VR gaming, running the HTC Vive.
Computer Specs:
- Intel i7-7740X
- ASUS PRIME X299-A
- Gigabyte GTX 1080 G1 Gaming 8GB
- XPG SX7000 512GB
- Corsair RMX 650W
- Corsair Vengeance LPX 16GB (2x8GB) DDR4
Water Cooling Specs:
- EK-CoolStream PE 480 (Quad)
- TUBE PrimoChill PrimoFlex (Bloodshed Red)
- EK-XTOP Revo D5 PWM - Plexi (incl. pump)
- EK-ACF Fitting 13/19mm - Copper
- EK-RES X3 250 - White
- EK-RES X3 250 - White
- EK-FC1080 GTX G1 - Nickel
Additional Items:
- AverMedia Live Gamer HD (Capture Card)
- 4x Corsair SP120 RGB LED Fans + Control Unit
- 2x Thermaltake Gaming PCI-E 3.0 X16 Riser Cable
- Analogue Voltage meter
- Copper piping
- Copper clamps
- 1x PCI-E X1 Riser Cable (to come / be installed)
- Raspberry Pi 3 - Model B (to come / be installed)
- Analogue Amp meter (to come / be installed)
- And one big piece of wood!
There are a few additions we want to add on, mostly cosmetic (some serving a small purpose), for example an amp meter, sitting just under the voltage meter. Might look to add an industrial light too, if we have the space. Other than that we plan on adding a Raspberry Pi3 (Just to the right of the capture card), hooked up to the fans covering the radiator for control over the mode/colour/speeds.
There’s been a few learnings from this, as it’s been our first time building a wall mounted computer. As you’ll see in one of the videos below, we decided to call the PC ‘After Thought’, as there was some rework that was done, and luckily for us some of the cabling just about fit. All in all good experience for the next one (some time in the future).
Filling Up: https://www.youtube.com/watch?v=mSO9RV1NlMA
Power On: https://www.youtube.com/watch?v=U-DYs5yJw0s
Hope you guys enjoy, and once the absolute final version is done I’ll be sure to upload that too!
p.s. log of photos in follow up posts. Latest image attached to this post
Last edited: