M@tree2
CUD has me already.
Hi all, so a little background, brand new PSU 1200W Master V Platinum, I9-10940X, Asus Prime A II, 64GB G Skill 3600 CL16, populated in 4 channels, Fans and everything run fine when I bypass the PSU.
Issues I am experiencing include:
Boards complete refusal to even make it to post, RGB comes on, does not go any further than that.
Solutions I have tried:
New PSU, tried my old 1000W Gold PSU.
Changed RAM to a different 64GB Kit
Removed RTX2060S
Removed all RAM.
Cleared CMOS, reset CMOS jumper.
Have flashed new bios and it takes that just fine, no change thereafter, still refuses to boot up.
Note: All components are new.
Getting another X299 board tomorrow, will see if that does same thing, will update.
Any help would be much appreciated.
Do suspect the obvious, but thought I would ask for advice first.
Issues I am experiencing include:
Boards complete refusal to even make it to post, RGB comes on, does not go any further than that.
Solutions I have tried:
New PSU, tried my old 1000W Gold PSU.
Changed RAM to a different 64GB Kit
Removed RTX2060S
Removed all RAM.
Cleared CMOS, reset CMOS jumper.
Have flashed new bios and it takes that just fine, no change thereafter, still refuses to boot up.
Note: All components are new.
Getting another X299 board tomorrow, will see if that does same thing, will update.
Any help would be much appreciated.
Do suspect the obvious, but thought I would ask for advice first.