Item: HP Elitebook 840 G3 Intel i5-6300U, 16GB Ram, 256GB NVMe
Age: No Idea
Price: R3000
Payment Method Accepted: EFT
Warranty: None
Warranty Holder: NA
Packaging: None, Will package properly if shipped
Condition: Read notes below
Battery Design Capacity: 46512 MwH
Battery Current Capacity: 39159 MwH
Battery Wear/Cycles: 82
Location: Amanzimtoti
Reason: Something else
Shipping: On buyer and risk
Collection : Sure
Link: https://support.hp.com/us-en/document/c05259054
Notes:
Condition is fair. Some scratches on the lid, Screen and keyboards is good no real marks or anything.
The orginal CPU fan failed. Took it to someone that replaced it but they could not find the exact same one so they ended up replacing it with a fan that will fit. This causes two issues.
1. The fan cables was soldered onto the fan connector on the board. It works fine but the laptop start up with fan fail warning and you need to press enter to start up.
2. The fan is seems to be always at 100%. So its quite loud but the upside is the temps are pretty good.
There is little cover piece that attached to the bottom cover that is missing, which exposes the display port a little. not a real issue.
Specs:
intel Core i5-6300U
16GB 2400MHZ Ram (Single stick)
256GB Hikvision NVMe
14" 1080p Display
WIFI and all of the normal Jazz
Windows 10
FYI
--------
Age: No Idea
Price: R3000
Payment Method Accepted: EFT
Warranty: None
Warranty Holder: NA
Packaging: None, Will package properly if shipped
Condition: Read notes below
Battery Design Capacity: 46512 MwH
Battery Current Capacity: 39159 MwH
Battery Wear/Cycles: 82
Location: Amanzimtoti
Reason: Something else
Shipping: On buyer and risk
Collection : Sure
Link: https://support.hp.com/us-en/document/c05259054
Notes:
Condition is fair. Some scratches on the lid, Screen and keyboards is good no real marks or anything.
The orginal CPU fan failed. Took it to someone that replaced it but they could not find the exact same one so they ended up replacing it with a fan that will fit. This causes two issues.
1. The fan cables was soldered onto the fan connector on the board. It works fine but the laptop start up with fan fail warning and you need to press enter to start up.
2. The fan is seems to be always at 100%. So its quite loud but the upside is the temps are pretty good.
There is little cover piece that attached to the bottom cover that is missing, which exposes the display port a little. not a real issue.
Specs:
intel Core i5-6300U
16GB 2400MHZ Ram (Single stick)
256GB Hikvision NVMe
14" 1080p Display
WIFI and all of the normal Jazz
Windows 10
FYI
--------
- For your and my protection please read our guide to safe dealing: https://carbonite.co.za/index.php?threads/guide-for-safe-dealing-on-carbonite.131249/
- A deal is concluded for purposes of feedback when parties agree to a deal
