Phoenix_ZA
Junior Member
- Joined
- Dec 3, 2020
- Messages
- 26
- Reaction score
- 16
- Points
- 485
- Age
- 36
Item: BRYDGE 12.3; Bluetooth Keyboard, trackpad and battery bank for MS Surface Pro and similar.
Age: 4 years
Price: R600.00
Payment Method Accepted: EFT
Warranty: Expired
Packaging: Original
Condition: Brand new, open box
Location: Fairland, Johannesburg
Reason: This was an RMA replacement, but I fixed the original, so I kept using it.
Shipping: Your cost and risk
Collection: Yes
Link: Brydge 12.3 Bluetooth Keyboard for Microsoft Surface Pros
This is a laptop conversion for most 12.3-inch PC tablets (and some large enough non-pc tablets).
It connects via Bluetooth and has a built-in battery bank to extend your tablet's battery life.
I used this same model (not this one) for my Eve V, a similar form factor device to the Surface Pro, and it fits beautifully.
The device is held in place with rubber gaskets, of which two sets are provided, that officially support Surface Pro, Pro 3, Pro 4, or Pro 6. I measured that it can take devices between approximately 8.50mm (maybe less) and 10mm (if not more) in thickness. The inner distance between the clamps is 260mm (which should be the maximum width of your screen unless your bezel is greater than 20mm), and the outer is 275mm, which should be the minimum width of your device.
FYI
--------
Age: 4 years
Price: R600.00
Payment Method Accepted: EFT
Warranty: Expired
Packaging: Original
Condition: Brand new, open box
Location: Fairland, Johannesburg
Reason: This was an RMA replacement, but I fixed the original, so I kept using it.
Shipping: Your cost and risk
Collection: Yes
Link: Brydge 12.3 Bluetooth Keyboard for Microsoft Surface Pros
This is a laptop conversion for most 12.3-inch PC tablets (and some large enough non-pc tablets).
It connects via Bluetooth and has a built-in battery bank to extend your tablet's battery life.
I used this same model (not this one) for my Eve V, a similar form factor device to the Surface Pro, and it fits beautifully.
The device is held in place with rubber gaskets, of which two sets are provided, that officially support Surface Pro, Pro 3, Pro 4, or Pro 6. I measured that it can take devices between approximately 8.50mm (maybe less) and 10mm (if not more) in thickness. The inner distance between the clamps is 260mm (which should be the maximum width of your screen unless your bezel is greater than 20mm), and the outer is 275mm, which should be the minimum width of your device.
FYI
--------
- For your and my protection please read our guide to safe dealing: Guide for safe dealing on Carbonite! | Guides, Stickies and Useful Stuff
- A deal is concluded for purposes of feedback when parties agree to a deal
Last edited: