Kill Switch
Member
- Joined
- Oct 25, 2019
- Messages
- 139
- Reaction score
- 66
- Points
- 1,585
Somewhat of a lurker.... but I'm at the end of my tether with working from home and crappy network connectivity(especially at TV) and need some advice.
I have the following equipment already:
4 x 1 Gb power-line adapters tp-link power-line and Wifi
Tp-Link Archer c7, Dlink DIR-825 .
Current setup, Fiber comes into study(far end of house), shared via dlink to main server ( network 1 - 2.4 GHz & 5Ghz).From dlink via powerline to Lounge (4 walls). From lounge via 2nd powerline on an extension cable to Tv ( I cant get poweline reception to TV over internal wiring no matter what combo I try, ). Powerline 3 to TV and shared via C7 ( network 2, 2.4 GHz & 5Ghz).Powerline 4 to Security system.
What I need:
Wired connections 1 @ server, 1 @ Security DVR, 4 @ tv.
Wireless node at server node at TV
The extension lead to TV needs to go, thus I need to rework the install or invest in Mesh.
I have read up on the Ubiquity and cant figure out how I would wire it in my house.
The other threads on mesh orbi rbk 13 and huawei Q2 seem to both give good feedback but the ports are limited to 2/3.
During my research Orbi rbk20/50 seems the best overall but since I need 3 nodes, it gets really expensive
I had though to wait for the launch of the Deco X20, but not sure when it will happen or final specs
Any thoughts appreciated
I have the following equipment already:
4 x 1 Gb power-line adapters tp-link power-line and Wifi
Tp-Link Archer c7, Dlink DIR-825 .
Current setup, Fiber comes into study(far end of house), shared via dlink to main server ( network 1 - 2.4 GHz & 5Ghz).From dlink via powerline to Lounge (4 walls). From lounge via 2nd powerline on an extension cable to Tv ( I cant get poweline reception to TV over internal wiring no matter what combo I try, ). Powerline 3 to TV and shared via C7 ( network 2, 2.4 GHz & 5Ghz).Powerline 4 to Security system.
What I need:
Wired connections 1 @ server, 1 @ Security DVR, 4 @ tv.
Wireless node at server node at TV
The extension lead to TV needs to go, thus I need to rework the install or invest in Mesh.
I have read up on the Ubiquity and cant figure out how I would wire it in my house.
The other threads on mesh orbi rbk 13 and huawei Q2 seem to both give good feedback but the ports are limited to 2/3.
During my research Orbi rbk20/50 seems the best overall but since I need 3 nodes, it gets really expensive
I had though to wait for the launch of the Deco X20, but not sure when it will happen or final specs
Any thoughts appreciated