Item: Wanhao D9 300 MkI (Upgraded)
Age: 3 years
Price: R6000
Warranty: No
Packaging: No
Condition: Good. 100% functional and reliable
Location: Fourways, Jhb North
Reason: Resin 3D Printer
Shipping: No.
Collection: Yes.
Link: Wanhao Duplicator 9 MK2 3D Printer | Wanhao D9/300 MK2
I'm selling my D9 300 with some nice upgrades.
The printer is really reliable, works great.
I've done a lot of upgrades and fixes to get it to this point, and really going to miss it, but since I haven't done any large prints in a while, and I'm getting into printing minis, I can't justify keeping this.
Upgrades include:
- Glass bed with buildtak (replaced buildtak magnetic sheet)
- PEI magnetic sheet (all sheets are interchangeable)
- Wanhao D9 MkII splitter-board, and round cable (replaced ribbon cable and v1 splitterboard which were apparently not reliable, but mine never failed me)
- Genuine Antclabs BLTouch v3 (replaced the capacitive probe, which can only probe metal surfaces. BLTouch not affected by surface at all)
- MKS smoothers on every stepper motor (removes salmon skin effect)
- Micro Swiss aluminium extruder handle (original plastic handle not of great quality)
- Upgraded part cooling solution including 5010 blower fan (replaced the pathetic OE cooling)
- 25A MOSFET for bed heater (takes load off mainboard heating the bed. The PSU now directly heats the bed)
- Aluminium extrusions replaced with higher quality parts (the originals were degrading and affecting print quality)
- Higher quality roller wheels (most polycarbonate, some still Delrin, but all of much better quality to the originals)
- Updated firmware to Waggster V1.0 (based off the Creality touch screen firmware, and Marlin 2.0)
With the printer, also comes pretty much all of the original parts. Pictured in the bag (fans, cooling parts, capacitive sensors, bearings, wheels, nuts and bolts, wiring, etc...If it's related to the printer originally, it's included in the bag)
Some tools (hex spanners, small side cutters)
Also throwing in a MKS SBASE 1.3 32bit mainboard & MKS32 (3.2 inch) touch screen. These were planned upgrades for the printer, but I never got there, and I have no use for them.
FYI
--------
Age: 3 years
Price: R6000
Warranty: No
Packaging: No
Condition: Good. 100% functional and reliable
Location: Fourways, Jhb North
Reason: Resin 3D Printer
Shipping: No.
Collection: Yes.
Link: Wanhao Duplicator 9 MK2 3D Printer | Wanhao D9/300 MK2
I'm selling my D9 300 with some nice upgrades.
The printer is really reliable, works great.
I've done a lot of upgrades and fixes to get it to this point, and really going to miss it, but since I haven't done any large prints in a while, and I'm getting into printing minis, I can't justify keeping this.
Upgrades include:
- Glass bed with buildtak (replaced buildtak magnetic sheet)
- PEI magnetic sheet (all sheets are interchangeable)
- Wanhao D9 MkII splitter-board, and round cable (replaced ribbon cable and v1 splitterboard which were apparently not reliable, but mine never failed me)
- Genuine Antclabs BLTouch v3 (replaced the capacitive probe, which can only probe metal surfaces. BLTouch not affected by surface at all)
- MKS smoothers on every stepper motor (removes salmon skin effect)
- Micro Swiss aluminium extruder handle (original plastic handle not of great quality)
- Upgraded part cooling solution including 5010 blower fan (replaced the pathetic OE cooling)
- 25A MOSFET for bed heater (takes load off mainboard heating the bed. The PSU now directly heats the bed)
- Aluminium extrusions replaced with higher quality parts (the originals were degrading and affecting print quality)
- Higher quality roller wheels (most polycarbonate, some still Delrin, but all of much better quality to the originals)
- Updated firmware to Waggster V1.0 (based off the Creality touch screen firmware, and Marlin 2.0)
With the printer, also comes pretty much all of the original parts. Pictured in the bag (fans, cooling parts, capacitive sensors, bearings, wheels, nuts and bolts, wiring, etc...If it's related to the printer originally, it's included in the bag)
Some tools (hex spanners, small side cutters)
Also throwing in a MKS SBASE 1.3 32bit mainboard & MKS32 (3.2 inch) touch screen. These were planned upgrades for the printer, but I never got there, and I have no use for them.
FYI
--------
- For your and my protection please read our guide to safe dealing: Guide for safe dealing on Carbonite! | Guides, Stickies and Useful Stuff
- A deal is concluded for purposes of feedback when parties agree to a deal
