[SPONSORED] - Project Sinister

[Spontaneous.Spinach]

Another thing I forgot to add earlier, I completed the program that I wrote for Sinister.
The problem I was having, was that the sensor ID's on my development machine were not the same as the Sinister rig, so I fixed that. It now displays perfectly and is accurate!

What sort of display is that? I also want to do something like that on my case[emoji4]

Sent from my SM-G900H using Tapatalk

 

[adamr]

Another thing I forgot to add earlier, I completed the program that I wrote for Sinister.
The problem I was having, was that the sensor ID's on my development machine were not the same as the Sinister rig, so I fixed that. It now displays perfectly and is accurate!

Yeah I want this display as well ... Please do tell


Sent from my iPhone 7 Plus

 

[SphinxMods]

Yeah I want this display as well ... Please do tell


Sent from my iPhone 7 Plus

Hey guys! If you go back earlier to the beginning of my build log, you'll see that I used the Liliput 7" external monitor, that I took out of its casing and made a shroud for it to sit inside of Sinister!

I had to specially import the monitor from China, it wasn't cheap. It was about R2500,00

 

[Spontaneous.Spinach]

Hey guys! If you go back earlier to the beginning of my build log, you'll see that I used the Liliput 7" external monitor, that I took out of its casing and made a shroud for it to sit inside of Sinister!

I had to specially import the monitor from China, it wasn't cheap. It was about R2500,00

Haha eish man, R2500![emoji13] Thanks for sharing your secrets with us, you're too kind!

Sent from my SM-G900H using Tapatalk

 

[SphinxMods]

Haha eish man, R2500![emoji13] Thanks for sharing your secrets with us, you're too kind!

Sent from my SM-G900H using Tapatalk

Haha no problem man!

 

[SphinxMods]

Hey everyone!

It is that time of the year, Sinister is in the run for the People's Choice Award over at Cooler Master for the World Series Case Mod Competition 2017!

Please could you take a minute to cast your vote? I'd greatly appreciate it!

http://makerhub.coolermaster.com/portfolio-item/mod-gallery-project-project-sinister-suart-henning/

Happy modding!

 

[Spontaneous.Spinach]

Ah, I voted
Best of luck 👍

Sent from my SM-G900H using Tapatalk

 

[SphinxMods]

Ah, I voted
Best of luck ��

Sent from my SM-G900H using Tapatalk

Thanks so much!

 

[RandomSheepZA]

Done bud.
Wishing you all the best.


Sent from my iPhone using Tapatalk

 

[Jack_Bauer_ZA]

Done.

Your workmanship is excellent. Now i just wish someone will build a showcase pc WITHOUT watercooling and lights everywhere....

 

[Off-The-Chart]

Done.

Your workmanship is excellent. Now i just wish someone will build a showcase pc WITHOUT watercooling and lights everywhere....

yes, because when you want to SHOWCASE something, you don't try and go with the most extreme visuals ever

do car shows go with any plain looking cars?

 

[Jack_Bauer_ZA]

Probeer jy nou weer slimklink? Natuurlik, die karre is skoon en gepolish maar nie ekstra uitlaatpype en klomp ligte nie. Dis nou n regte kar show met normale motors, nie die wat gepimp is.

 

[Munk]

Purely my 2cents.

It looks like you may have rushed the bends, possibly during the latter stages of the build.
Consider pre-building and doing some sample bending before going forth with case mods.
Then you will have a better chance of securing great bends.

I'm mentioning this because in the close-up of the bends from the rear of the chassis; IMO the top tube appears to be kinked when going from horizontal to vertical.
Could just be me and these eyeballs of mine.

Good luck with the competition.

 

[SphinxMods]

Done bud.
Wishing you all the best.


Sent from my iPhone using Tapatalk

Thanks so much man!

 

[SphinxMods]

Purely my 2cents.

It looks like you may have rushed the bends, possibly during the latter stages of the build.
Consider pre-building and doing some sample bending before going forth with case mods.
Then you will have a better chance of securing great bends.

I'm mentioning this because in the close-up of the bends from the rear of the chassis; IMO the top tube appears to be kinked when going from horizontal to vertical.
Could just be me and these eyeballs of mine.

Good luck with the competition.

No you are completely correct, during the final stages of the build, the pipes were a bit rushed (I am not proud of this), however I am in the process of redoing the bends, I specifically imported a new hardline pipe bending kit and did some work for a few clients of mine.

Here is a build I did for another client quite recently actually, but since the client also added the GPU to the water loop:

I have just added a link to where I do mention my unhappiness with the way I did the water piping here: http://carbonite.co.za/showthread.php?t=135418&p=954277#post954277

 

[SphinxMods]

Done.

Your workmanship is excellent. Now i just wish someone will build a showcase pc WITHOUT watercooling and lights everywhere....

Thank you so much man!

Haha perhaps one day

 

[Dulcis Ultio]

Done.

Your workmanship is excellent. Now i just wish someone will build a showcase pc WITHOUT watercooling and lights everywhere....

This^ Keep your eyes peeled though, just such a build is coming

 

[Munk]

That loop with the ASRock board will look much better with the GPU included.
I've adopted the TTL/OC3D mentality, short runs are best runs.

If you ever need some pro-bono (free) work done in regards to these types of tasks please hit me up.
Not expecting anything but the offer is there with no expiry date.
I will always make time to build awesome systems.

 

[CrenulateInk98]

Done,

Goodluck Stew! For anyone who has not seen this in person, it is just gorgeous. And that display left my pants crusty. I have known Stuart aka Mr. Sphinx for a while now and I can confidently tell you that this guy pours his heart into his builds.

 

[SphinxMods]

Done,

Goodluck Stew! For anyone who has not seen this in person, it is just gorgeous. And that display left my pants crusty. I have known Stuart aka Mr. Sphinx for a while now and I can confidently tell you that this guy pours his heart into his builds.

Thank you for the kind words Ethan