- Joined
- Nov 2, 2014
- Messages
- 8,667
- Reaction score
- 2,630
- Points
- 11,335
Morning,
I have this 480 8gb (Dataland) that was giving issues mining randomly. Put it into my system to find out what it is & initial boot there wasn't a GPU clock or Pixel/Texture fillrate registered in GPU-X. Decided then to flash which initially wasn't able to access ROM, 2nd/3rd attempt it was able to & flashed it with both the Dataland BIOS & the Red Devil BIOS (same card). Default & boost clock's are both registering as the boost in GPU-Z (1330mhz) but does downlclock in idle states.
On both BIOS' the card freezes under any load (heaven benchmark), it runs windows & low load scenarios just fine but freezes up under anything significant for about 30s-1m. I'm hoping it's just something software related but I may have also had a bad riser & hoping to not have essentially bricked the card on a short or something to the effect. The last thing I cannot seem to find a reference to is Device_ID so that I can cross-check it is the correct ID as that may also have an effect on it.
I'll go into hive & give try reflash with ROM unlock etc if windows doesn't work but obviously it'd be more ideal that it gets done in windows.
As always any suggestions are much appreciated & TIA
EDIT: Looked over this but seems the core is receiving large amounts of voltage to the core @1.22v in both polaris editor & HWinfo64 - although polaris is more concerning as it states blady 6.5v
EDIT: Seems to be Memory related, any memory load causes the freeze & a black screen flash which then resets operation as wattman resets the profiles to default. I fucken hope my blady memory didn't die on this xD
I have this 480 8gb (Dataland) that was giving issues mining randomly. Put it into my system to find out what it is & initial boot there wasn't a GPU clock or Pixel/Texture fillrate registered in GPU-X. Decided then to flash which initially wasn't able to access ROM, 2nd/3rd attempt it was able to & flashed it with both the Dataland BIOS & the Red Devil BIOS (same card). Default & boost clock's are both registering as the boost in GPU-Z (1330mhz) but does downlclock in idle states.
On both BIOS' the card freezes under any load (heaven benchmark), it runs windows & low load scenarios just fine but freezes up under anything significant for about 30s-1m. I'm hoping it's just something software related but I may have also had a bad riser & hoping to not have essentially bricked the card on a short or something to the effect. The last thing I cannot seem to find a reference to is Device_ID so that I can cross-check it is the correct ID as that may also have an effect on it.
I'll go into hive & give try reflash with ROM unlock etc if windows doesn't work but obviously it'd be more ideal that it gets done in windows.
As always any suggestions are much appreciated & TIA
EDIT: Looked over this but seems the core is receiving large amounts of voltage to the core @1.22v in both polaris editor & HWinfo64 - although polaris is more concerning as it states blady 6.5v
EDIT: Seems to be Memory related, any memory load causes the freeze & a black screen flash which then resets operation as wattman resets the profiles to default. I fucken hope my blady memory didn't die on this xD
Last edited: