Yuppy
New Member
- Joined
- Jul 10, 2019
- Messages
- 7
- Reaction score
- 0
- Points
- 215
- Age
- 27
Hey Carb,
I recently moved from air cooled GPU (XFX 590 Fat Boy) and AIO on my CPU (AM4 Ryzen 2600) to a full hardtube setup. Completed leak testing and got about 99% of the air out and let it run/bleed for 24Hrs, temps on the GPU is down by apprx 20 degrees and the CPU is less 5 degrees with no load but basically no difference.
Although I recently experienced 2 freezes forcing a restart, while playing overwatch my pc froze up and couldnt respond to anything. pump was still running as per the flow meter and fans were still going. This only happened once a day so far, I ran cinebench (did about 4 runs) with no issues and don't suspect it's the GPU as my OC doesn't reset and if the GPU crashes I usually get a notification from Wattman.
With my new set up I no longer have exhaust fans for my VRM's, I'm using the Lian Li o-11 dynamic with 2 intakes at the base and 3 fans vertical in the case for the 360 rad.
Specs :
Cpu - AM4 ryzen 2600 (4.125Ghz, 1.375v)
Ram - 2x 8Gb 3000Mhz CL16(or 15)
MB - B450 Tomahawk MSI(ATX)
GPU - XFX 590 Fatboy
Any assistance or direction would be great, im suspecting a VRM or CPU issue but the benchmarks say unlikely
I recently moved from air cooled GPU (XFX 590 Fat Boy) and AIO on my CPU (AM4 Ryzen 2600) to a full hardtube setup. Completed leak testing and got about 99% of the air out and let it run/bleed for 24Hrs, temps on the GPU is down by apprx 20 degrees and the CPU is less 5 degrees with no load but basically no difference.
Although I recently experienced 2 freezes forcing a restart, while playing overwatch my pc froze up and couldnt respond to anything. pump was still running as per the flow meter and fans were still going. This only happened once a day so far, I ran cinebench (did about 4 runs) with no issues and don't suspect it's the GPU as my OC doesn't reset and if the GPU crashes I usually get a notification from Wattman.
With my new set up I no longer have exhaust fans for my VRM's, I'm using the Lian Li o-11 dynamic with 2 intakes at the base and 3 fans vertical in the case for the 360 rad.
Specs :
Cpu - AM4 ryzen 2600 (4.125Ghz, 1.375v)
Ram - 2x 8Gb 3000Mhz CL16(or 15)
MB - B450 Tomahawk MSI(ATX)
GPU - XFX 590 Fatboy
Any assistance or direction would be great, im suspecting a VRM or CPU issue but the benchmarks say unlikely