z3ttro
Legendary Member
- Joined
- Jul 28, 2013
- Messages
- 471
- Reaction score
- 50
- Points
- 4,235
- Location
- Cape Town, Northern Suburbs
Item:Galaxy GTX 980 TI HOF
Age:Not sure
Price:2400
Warranty:Will give 7 days personal warranty
Packaging:Original
Condition:Good, except for one fan. See below
Location:Cape Town, Durbanville
Reason: spare
Shipping:Sure
Collection:Yes
Link: Click Me
Please note that the PWM controller in one of the fans is broken (The smaller fan on right if the card is mounted), the fan just stands still. However if you provide just power to the fan without PWM then it spins fine. I have tested the card and it was still running fine with just the two remaining fans, however it was bothering me that the one fan was not working. So I have disconnected that fan from running off the GPU and connected it to its own normal 3pin fan connector. The 3pin fan connector I connect now to molex to 3pin connector that have modified to run at 7V, reason being that the fan is a bit loud a 12V and it is not necessary. I will include the modded molex to 3pin connector in the sale, but because its a normal 3pin fan connector you can plug it into any fan controller. The fan cable is about 15 to 20cm long so should reach where you need it to go. The card look exactly like before except its got an extra fan cable coming out at the back. Please PM me if you have any questions.
Age:Not sure
Price:2400
Warranty:Will give 7 days personal warranty
Packaging:Original
Condition:Good, except for one fan. See below
Location:Cape Town, Durbanville
Reason: spare
Shipping:Sure
Collection:Yes
Link: Click Me
Please note that the PWM controller in one of the fans is broken (The smaller fan on right if the card is mounted), the fan just stands still. However if you provide just power to the fan without PWM then it spins fine. I have tested the card and it was still running fine with just the two remaining fans, however it was bothering me that the one fan was not working. So I have disconnected that fan from running off the GPU and connected it to its own normal 3pin fan connector. The 3pin fan connector I connect now to molex to 3pin connector that have modified to run at 7V, reason being that the fan is a bit loud a 12V and it is not necessary. I will include the modded molex to 3pin connector in the sale, but because its a normal 3pin fan connector you can plug it into any fan controller. The fan cable is about 15 to 20cm long so should reach where you need it to go. The card look exactly like before except its got an extra fan cable coming out at the back. Please PM me if you have any questions.
Last edited: