Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Join Date
    Feb 2016
    Age
    24
    Posts
    255
    Mentioned
    33 Post(s)

    Build log for all you mini-ITX gaming PC enthusiast

    Hey guys this is my very first build log going to build a Mini-ITX PC in the coming day or two the case that i found was for me exactly what I was looking for... REALLY small and can pack really premium grade components... This in my eyes will be a true no compromise mini-PC build where you don't have to settle with ONLY a mini-ITX form factor GPU or ONLY a single AIO radiator and you can overclock the CPU and temps and noise levels won't be a problem....

    The Components:




    • 256gb samsung ssd

    • 2TB Seagate





    The components aren't the BEST in anyway the system is dated compared to the newer stuff out there but this mini PC still has A LOT of horse power and upgrading the GPU to something like a 1080ti will give you near the best performance currently, if funds allow it... But I think the components in this build give a really good representation of a strong PC and I will see in the future how this case and the components deal with the heat and noise in this tiny case of only 14.985 Liters... If the temps are good with a 780ti then you can pretty much put any GPU in this case and you will see either better or similar temps... I will also be overclocking the CPU to the best clock speed that I feel comfortable with for every day use... So yeah stay tuned all components is currently being delivered
    Last edited by scarecrow101; 22-08-2017 at 03:37 PM.

  2. #2
    Join Date
    Feb 2016
    Age
    24
    Posts
    255
    Mentioned
    33 Post(s)

    Re: Build log for all you mini-ITX gaming PC enthusiast

    Got all the part yesterday... and assembled everything after work... Took me around 4-5 hours to dissemble my normal ATX rig and reassemble the mini-ITX rig.... the case on paper is small... But when i received it yesterday i then realized just HOW small it really is. I mean the case was a little bit bigger than the Antec H1200 pro box it came in , took forever to clear the cables and figure out how I'm going to fit everything in this small case will probably redo my cable management in the coming days.... But everything fitted to my surprise and i was lucky enough that the PC booted with my first test boot but my pump of my duel rad cooler wasn't plugged in, derp!!! So quickly plugged in the pump and the PC was 100%... Going to upload a few pics after work today and will do an OC and termal test this weekend to see if all the effort payed off to get a low temperature, near silent high performing shoe box of a mini-ITX computer...

  3. #3
    Join Date
    Aug 2013
    Age
    34
    Posts
    586
    Mentioned
    59 Post(s)

    Re: Build log for all you mini-ITX gaming PC enthusiast

    Hey man, welcome to the itx scene. Personally, I love itx. Can be such a pain but I love the compact size of an itx pc. Upload pics please...want to see how case looks with components in. Good luck
    “We judge ourselves by our intentions and others by their behaviour.” - Stephen M.R. Covey

  4. #4
    Join Date
    Feb 2016
    Age
    24
    Posts
    255
    Mentioned
    33 Post(s)

    Re: Build log for all you mini-ITX gaming PC enthusiast


  5. #5
    Join Date
    Feb 2016
    Age
    24
    Posts
    255
    Mentioned
    33 Post(s)

    Re: Build log for all you mini-ITX gaming PC enthusiast

    My new mini PC... Sorry for the photos all my cables had to be moved to the side of the case because that was the only space i had to put the cables, in the middle of the case on the mobo its open to ensure no cables get caught up in the fans... This PC is crazy compact... because i went with a duel radiator there was no space for my ssd so i double sided taped the ssd to my power supply... The computers temps are ridiculously good... I OCed my i7 3770k to 4.6GHz @ 1.2V and saw a max temp of 80 degrees on the hottest core running Prime95 on its hottest stress setting... GPU temps are also really good... basically as good as running it in a full ATX tower.... So all and all I am happy with the end result... Had a Coolermaster Elite 130 before this... And was disappointed with temps and noise level (had to run my pc without the cover plate for it not to overheat)... This case is smaller and gives WAY better temps with being almost dead silent on idle... I am using Speedfan software to control my fan speeds of my radiator to not only check the CPU temps but the GPU as well because the radiator fans are the only ones i got for exhaust.
    Last edited by scarecrow101; 25-08-2017 at 08:40 AM.

  6. #6
    Join Date
    May 2011
    Location
    Cape Town
    Age
    28
    Posts
    1,096
    Mentioned
    64 Post(s)

    Re: Build log for all you mini-ITX gaming PC enthusiast

    Nice build man toughest part of m-itx builds are cabling, if you have a bit extra in the budget https://beyondcustoms.net/ can hook you up with some nice custom cables, to length to remove some of the clutter.

    "Pity I am not a mod, would have lit his ass on fire."
    - ScorpioMan86 Before he was a Mod

  7. #7
    Join Date
    Feb 2016
    Age
    24
    Posts
    255
    Mentioned
    33 Post(s)

    Re: Build log for all you mini-ITX gaming PC enthusiast

    @Death the Kid Yeah would have been nice but i don't have a fully modular atx PSU... And this case unfortunately doesn't support fully modular ATX power supplies because they are simply too big... And the fully modular SFX PSU are REALLY expensive... will probably in the future get me one of these and get myself some custom cables but damn that price of the PSU xD

  8. #8
    Join Date
    Oct 2012
    Location
    Cape Town
    Age
    29
    Posts
    1,162
    Mentioned
    47 Post(s)

    Re: Build log for all you mini-ITX gaming PC enthusiast

    HOLY MOLY.. tight fit.
    My 250D was just right to work with. Can't imagine anything that small!
    6700k @4.5|Asus Z170i Pro Gaming|Corsair H60|G.Skill Ripjaws V 3200 2x8Gb|Galax 1070 Exoc
    Samsung 850 PRO 512Gb|4Tb HDD|Corsair CX600M|Logitech G502|Corsair K70
    Corsair Obsidian 250D|Dell UP2516D|Corsair Vengeance 1500

  9. #9
    Join Date
    Feb 2016
    Age
    24
    Posts
    255
    Mentioned
    33 Post(s)

    Re: Build log for all you mini-ITX gaming PC enthusiast

    @AceSwiftShooter haha it was TIGHT... took me around 2 hours just to route cables and stuff in the case so they won't get caught in rad fans... But when i decided to go back to mini-ITX i decided to go for the smallest case that i can find in SA that supports duel Rad and full length GPU and full ATX PSU... This case supports basically the same as the 250D but is around half the size ... I think the only smaller case(and not by a lot) is the M2 Ncase that supports the same components... But yeah man thanks for the MOBO and CPU... They run really good... and a 4.6ghz OC of the 3770k on 1.2V is REALLY good for the chip... so I am happy that i got a good chip

  10. #10
    Join Date
    May 2011
    Location
    Cape Town
    Age
    28
    Posts
    1,096
    Mentioned
    64 Post(s)

    Re: Build log for all you mini-ITX gaming PC enthusiast

    Quote Originally Posted by scarecrow101 View Post
    @Death the Kid Yeah would have been nice but i don't have a fully modular atx PSU... And this case unfortunately doesn't support fully modular ATX power supplies because they are simply too big... And the fully modular SFX PSU are REALLY expensive... will probably in the future get me one of these and get myself some custom cables but damn that price of the PSU xD
    Sorry, was a bit unclear. I noticed the sata power and data cables, I have the same issue in my elite 120. You can get shorter sata power cable with only a single sata power connector as well as shorter sata data cables since everything is so close together it should help eliminate any unused connectors.

    "Pity I am not a mod, would have lit his ass on fire."
    - ScorpioMan86 Before he was a Mod

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •